Position | Qty | Value | d x h (mm) |
---|---|---|---|
C14, C17, C18, C21 | 4 | 1uF 50V | 5 x 11 r5 |
C24 | 1 | 2.2uF 50V | 5 x 11 r5 |
C174 | 1 | 4.7uF 50V | 5 x 11 r5 (Low ESR) |
C10, C34 | 2 | 10uF 50V | 5 x 11 r5 (Audio) |
C11, C22, C42, C43, C142 | 5 | 10uF 50V | 5 x 11 r5 |
C39 | 1 | 22uF 16V | 5 x 11 r5 |
C7, C8 | 2 | 100uF 16V | 6,5 x 11 r5 |
C134 | 1 | 330uF 16V | 8.2 x 12 r5 (Low ESR) |
C150 | 1 | 2200uF 6.3V | 13 x 20 r5 (Low ESR) |
C10, C34 are audio grade capacitors (Nippon Chemicon LLA series, low leakage).
C134 and C150 should be low ESR, otherwise you will get a whining/hissing/purring noise out of L29(coil), nothing to worry about but it can be rather loud (see update below).
Position | Qty | Value | d x h (mm) | Manufacturer # |
---|---|---|---|---|
C134 | 1 | 330uF 25V | 10 x 16.5 r5 | UPJ1E331MPD6 |
C150 | 1 | 2200uF 6.3V | 16 x 16.5 r7.5 | UPJ0J222MHD6TN |
Update: After trying out a handful of low ESR capacitors with a variety of noise levels, I found a combination that is almost silent, post a reply if this worked for you (YMMW) 🙂
Both caps are Nichcon UPJ series (5000 Hrs @ 105°C). The 2200uF cap is a bit bulkier and lead spacing is 7.5 mm, but it can be mounted pretty nicely anyhow. My Jaguar is now purrfect !