FD-148 is a third party floppydrive for the Commodore 64.

 

 


 

 


Remove the screws marked with red and lift the cover.
 


You need to loosen 4 screws to remove the shielding and additional 3 screws to release the PCB.
 


Detach the white connectors and lift the main PCB. There is a ribbon cable beneath the PCB which also needs to be detached. The back plate can now be removed.
 


Remove the 3 screws marked in the picture. There are spacers below that PCB which you need to take care of.
 


Spacers marked with red.
Two voltage regulators(7805/7812) are fastened to the black heatsink to the right.

 


Flip the drive around and remove the 4 screws.
The drive mech is now loose, lift the plastic casing.