Parallell cable for Oceanic (OC-118) / Excelerator Plus drive.

You need to connect the following pins (identical to 1541). This drive works with Zoomfloppy.

 

There are four screws that hold the bottom plate, turn the drive upside down and remove the screws. Now you have access to the PCB.

 

Locate the correct chip by the pictures below (i soldered the wires directly to the legs).

Parallell cable for Oceanic (OC-118) / Excelerator Plus

 

Parallell cable for Oceanic (OC-118) / Excelerator Plus closeup